Transfer of dates to the quartz calendar. Instructions for the operation of the year

Instruction

First for everything, know the reference for the information about the hour. For which browser, which supports JavaScript, go to the next site: http://direct-time.ru

Do not show respect at the showing of the birthday celebration on this site. It may not be valid due to the incorrect setting of the time zone. And the axis of time is 1 second for the virtual year of synchronization with the NTP protocol, which is clear, and, in its own right, otrimuyut signal from the navigation satellite.

The mechanical yearbook from the second hand should be inserted more accurately up to the second, even if the grains are not overpowered. The stench is less likely to stink, if the spring factory ends again. Try to pokat, if the year is ticking, set the hour a little ahead, and if the value of the year, the seconds on the computer screen fluctuate with the notes - just start the year.

Significantly handy for this sensi mechanical quartz year. Schob їх zupiniti, enough to take the battery. Like a quartz yearbook, it’s handy, it’s not necessary to wind it. Just pull the head, and the stink stink. Let's install them exactly to the second in the way described above.

On the wrist electronic year with a chotyri-discharge indicator, use the button to select the function to switch to the stopwatch mode. Let's wait, if you show the seconds on the anniversary date to go through zero, press the installation button. After that, it’s not right to set the showing of the year and the whilin with a great rank.

On the electronic year with a six-digit indicator, use the function switch button to select the installation mode. Let's use the button to switch between knowing to choose seconds (the stink to start blaming), as if the stench is not selected and so. After that, when passing the indication of seconds through zero, press the installation button on the special year.

On some of the annuals, there is a button for a wild drop. The fallow type of the model with її onrush display is discounted at 00:00, 11:11 and 12:00. The number of seconds at which it is thrown off to that fall, as it is impossible to show them on the indicator. Zdіysnivshi zagalne skidannya, then put up an anniversary and praise with a great rank.

Return respect

Showing whether a year-old is necessary to correct periodically.

The Windows operating system has a function to show the hour of that date. At the right lower end of the working table, you can check the following parameters. For some reason the computer is displaying incorrectly hour, it is necessary to make a birthday.

you need

- computer;
- Internet access.

Instruction

At the end of the day, as soon as it appeared, set the correct day and month, brimming with the lists of the “Date and hour". You can open the tab at the window of the window. Choose from the table of days of today the current date by clicking on the new left mouse button.

At the field of the installed hour, you can see the indicator of wheezes at the right section (“Hour”) of the tab. Set the exact number of quills, vicorist keys for navigation (arrows up and down). You can also enter the required numbers from the keyboard or use the right-handed arrows to enter the entry field. Set so the most correct number of seconds and years.

If your computer is connected to a domain in the local area, this year's date can be synchronized with the clock of the server of that domain. Then the tab "Hour of the Internet" will appear inaccessible on the panel for setting the authorities to date that hour. If the tab is available, click on it to synchronize the computer's year with the server's hour.

Add a badge at the top edge of the tab (at the specified checkbox), and at the list that appears, select the available server for the exact hour. Although the required address is not in the list, it can be entered manually from the keyboard.

In our time, a lot of different models of years have been created. It is possible, for some reason, that they are working on those other mechanisms of the flooring that they have a problem. Ale, all the annuals at the same time work approximately according to one principle. So far, stinks are classified mainly into two types - mechanical and electronic. Guess how to set an hour on such anniversaries.

Instruction

Mechanical:

On a mechanical year, start a special “wheel”, for the help of which the hour is restored. Like a manual mechanical year, it is necessary to pull the trochs forward and turn the arrows along the year's arrow to quiet numbers, as you need. If the year is showing seconds, then you can set more exactly the hour for an additional radio or TV, so that you can synchronize your year with the year of the radio station, for which you will need to hear the hour. In addition, as the required hour has been chosen, the "wheel" should be inserted back exactly at the moment of transmission of the signal to the hour.

Electronic:

It’s a good idea to set the hour on the electronic yearbook - just like rozіbratisya in the computer. Indeed, on such outbuildings there is a special menu and in the new one you can set the hour. It is only necessary to know the button, which will be sent in an hour, and press it, reaching the instructions from the yearbook. Sound after the pressing of the button, as if it were answered in an hour, the numbers will start blinking, then the time has come to start. You need to press the button, and the numbers will sequentially change one by one, set the hour and press the special button again (look at the instructions) to fix yoga.

Porada 4: How to set the exact hour on the birthday with arrows

On a birthday with a digital display, the hour is restored easily, be it any accuracy. And if the yearbook is "arrow", then it is awkward to set the yearbook and hvilini awkwardly, and the axis, how to measure the yearbook, show the hour exactly to the second?

you need

Yearbook with arrows, as an option - access to the Internet

Instruction

Little by little, know the exact hour. If you have a computer with access to the Internet, then dial the "Exact hour" in Yandex. We need an hour and seconds.

Dock the docks of the second arrow of the birthday to the sign 12 and pull the head of the birthday.

Leave a year and a note for an hour, a troch more than what is indicated on the computer display. For example, the hour is 12:21:17, and you put 12:22 on the year. Now, just like a yearbook on the computer, it will show exactly 12:22, press the head of the yearbook. І hour will be displayed for sure!

Return respect

The yearbook is fastening, the second hand is not blocked when the yearbook head is hanging. If you happen to be in the position of the second hand on the number 12, turn on the battery, and then in another way, start the yearbook at the same hour.

Accuracy is virtuousness like queens, and respects the skin of a modern person. Sob your computer showing correctly hour to the nearest second, the next viconate just fixed the system year.

Instruction

Video on the topic

Jerela:

correct hour with seconds in 2017
Don't know

The mechanical yearbook can swell. The electronic systems may contain a battery. Abo just turn on the electricity hour, and the same data about the hour will change and the year will have to be restored again. І best fit hour. Only a little bit of yoga is required to be recognized.

you need

- TV and radio receiver
- telephone, stationary or stylish
- computer or communicator, connections to the Internet

Instruction

Turn on the radio or TV. Most radio stations, especially serious ones, report more accurately hour on the cob of the skin year. Central TV channels show screensavers from the images of the anniversary before the release of news, a number of TV channels show information about the exact hour and weather in the region in one screen on a regular basis.

Make a call to the telephone service at the exact hour of your place. The telephone number of the service can be found from the telephone operator. If your place does not have such a service, call the service of another place. However, at every turn you happen to pay for the services of a foreign telephone call. Information about the exact hour at the telephone service will inform you of automatic notification. There is no such thing as a landline phone, you can call the number for a style officer. And it’s better to call ahead by telephoning to the operator’s advanced service. It is quite possible that your operator himself gives the service of the appointment of the exact hour, and the service is given to cost you more cheaply.

split chronograph

Last hour

VIBRANE KERIVNYTSTVO:Time setting | standard

Time setting

A: Normal head position

C: Position set to the hour

To set the hour, hang the crown in position C and turn for the year's arrow. After the rearrangement is completed, turn the crown to the position A.

VIBRANE KERIVNYTSTVO:Replacement of life | Skin

Replacement of life

1. Gently open the battery cover for an additional small twist.

2. Insert the battery into the battery cover with the (+) sign facing down.

3. Insert the battery cover with the inserted battery from the bottom into the body of the yearbook.

VIBRANE KERIVNYTSTVO:Retrograde arrow adjustment

Arrow adjustment

Chronograph adjustment

VIBRANE KERIVNYTSTVO:Replacement of life | standard

Replacement of life

Important:
When inserting a new battery, be careful not to break the terminals (+) on the sides. The terminal (-) is located on the bottom side of the battery.

UVAGA: the maker's warranty does not extend to the SWATCH year, the service of such orders was carried out by unauthorized facsimiles

VIBRANE KERIVNYTSTVO:Adjustable hands Skin Chrono

Arrow adjustment

New Year's Day (for example: then replace the batteries or later hard hit):

Press on...

1. P1і P2 at once and trim doti, doki A, B, і C do not wake up at the right time.

2.P2. BUT start a new reprimand.

3.P1, schob pidgnati A,

4. P2 renew. At start a rebuke.

5.P1, schob pidgnati b.

6. P2 renew. C start a rebuke.

7. P1, schob pіgnati C.

8. P1і P2 one hour to complete the settings. Yaxcho Wee don't hustle on P1і P2 for 5 seconds, then the calendar will automatically complete the procedure.

VIBRANE KERIVNYTSTVO:Addendum function Loomi

LOOMI

Pіdsvіchuvannya.

VIBRANE KERIVNYTSTVO:Happy New Year's Eve | retrograde | Stopwatch

Stopwatch

Press...

Retrograde: Trivality timekeeping is 2 years old.

VIBRANE KERIVNYTSTVO:Arrow adjustment Standard

Arrow adjustment

Chronograph adjustment(for example, after replacing the batteries or a strong blow)

1. Move the crown to position B by pulling the knob.

2. Press the top button so that the 1/10th of a second hand will drop at the 12:00 position.

3. Press the bottom button, so that the second hand also stops at the 12:00 position.

4. Move the crown to position C.

5. Press the top button, so that the hvilinnaya arrow dipped at the 12:00 position.

6. Press the crown to move the її to position A.

VIBRANE KERIVNYTSTVO:Additional function Loomi Touch

Addendum function

Press the trochs of your Swatch.

Loomi vmikaєtsya.

VIBRANE KERIVNYTSTVO:Setting the date of the day | standard

Setting the date of that day

To set the date, twist the head into position B and turn it against the arrow of Godinnikov. To set the day of the day, turn the head for the year's arrow. After installation, put the head back in position A.

VIBRANE KERIVNYTSTVO:Happy New Year's Eve | retrograde | TACHYMETER

TACHYMETER

Press...

2. Once again, to fix the timing after the passage of the station at 100 or 1000 m. Recognize the speed indicated by the 60-second lichnik (Retrograde: 30 sec) on the total station scale (km/h = kph = km/year).

3. Show the bottom drop button.

VIBRANE KERIVNYTSTVO:Addendum function Pop

Addendum function

Note: You can wear your Swatch yearbook just on a bracelet or attach it directly to your clothes.

VIBRANE KERIVNYTSTVO:Added function Scuba

Addendum function

Koristuvannya by the new kіlts.

For the establishment of an hour, the start of that rush. Look at the markings of the fixed ring behind the hvilinny arrow. The hour, which has passed, will be indicated with a hvilinny arrow behind the numbers on the set ring.

Important: If you drink salty water, the Skuba 200 chronometer can be washed with clean water.

Respect: Irony Scuba 200 Chrono is not a professional annual.

VIBRANE KERIVNYTSTVO:Happy New Year's Eve | standard | intermediate finish function

Add Function

Push...

VIBRANE KERIVNYTSTVO:Arrow adjustment Touch / Fun

Arrow adjustment

Verification and installation

Trim the head with a pressed pull for 5 seconds. If it hurts the arrows to be set exactly at 12:00 - everything is fine. Press on the head one more time and turn the arrows to indicate the current hour. If the arrows are not set exactly for 12 years, they must be adjusted. Pull the head to position 2 to insert the year hand, turn it behind the year hand, for the bad one - the anti-year hand. After turning the crown at the outer position, the arrows turn to the current hour.

VIBRANE KERIVNYTSTVO:Happy New Year's Eve | standard | TACHYMETER

TACHYMETER

Set the basic value of the speed (100 m x 1000 m).

Press...

1. Top button one hour іz kob dії.

3. Show the bottom drop button.

VIBRANE KERIVNYTSTVO:Replacement of life | Touch/Fun

Replacement of life

1. Gently open the plastic cover behind a small twist.

2. Replace battery. Plus sign (+) up.

3. Re-insert the plastic lid in its place (until it clicks).

Note: Make sure that the gum gasket is installed correctly, and also that it is clean and does not blemish.

important When inserting a new battery, be careful not to break the terminals (+) on the sides. The terminal (-) is located on the bottom side of the battery.

UVAGA: the maker's warranty does not extend to the SWATCH year, the service of such orders was carried out by unauthorized facsimiles

VIBRANE KERIVNYTSTVO:Happy New Year's Eve | Chrono Automatic | Stopwatch

Stopwatch

Press...

1. Top button to start the chronograph.

2. Once again, to fix the hour that has passed.

3. Show the bottom drop button.

VIBRANE KERIVNYTSTVO:Happy New Year's Eve | retrograde | split chronograph

split chronograph

Last hour

1. Click on the top button to take the first result.

2. The bottom button is for reading the value of the intermediate hour.

3. Press again to repeat (repeat the rest of the two steps once more, if you want to know about the hour, the shards of chrono continue to practice).

4. Pressing the top button, zupinіt її is enough.

5. The bottom button rotates out of position.

VIBRANE KERIVNYTSTVO:Happy New Year's Eve | standard | Stopwatch

Stopwatch

Press...

1. Top button to start the chronograph.

2. Once again, to fix the hour that has passed.

3. Show the bottom drop button.

VIBRANE KERIVNYTSTVO:Happy New Year's Eve | Chrono Automatic | intermediate finish function

intermediate finish function

Push...

1. Press the top button to start.

2. For rahuvannya first pokaznik timekeeping top button.

3. For the chronometer, restart the top button.

4. To read the value of the additional hour, press the top button. (repeat qi two points of the style, you need the skil).

5. To turn to the post position, use the bottom button.

VIBRANE KERIVNYTSTVO:Happy New Year's Eve | Chrono Automatic | TACHYMETER

TACHYMETER

Set the basic value of the speed (100 m x 1000 m).

Press...

1. Top button one hour іz kob dії.

2. Once again, to fix the timekeeping after the passage of a distance of 100 or 1000 m. Take the indication of speed, indicated by a 60-second meter on the total station scale (km/h = kph = km/year).

3. Show the bottom drop button.

VIBRANE KERIVNYTSTVO:Happy New Year's Eve | retrograde | intermediate finish function

intermediate finish function

Push...

1. Press the top button to start.

2. For rahuvannya first pokaznik timekeeping top button.

3. For the chronometer, restart the top button.

4. To read the value of the additional hour, press the top button. (repeat qi two points of the style, you need the skil).

5. To turn to the post position, use the bottom button.

VIBRANE KERIVNYTSTVO:Time setting | Touch/Fun

Time setting

Time setting Pull the crown to position 2. You can set the winder to the top wrapping of the crown, the swede wrapping is a year-old. Press on the head and bring it to the exit position.

VIBRANE KERIVNYTSTVO:Hand adjustment Chrono Medium

Arrow adjustment

Chronograph adjustment(for example, after replacing the batteries or a strong blow)

1. Move the crown to position B by pulling the knob.

2. Press the top button to move the soft arrow to the 12:00 position (Retrograde: 0).

3. Pulling on the head, move її to position C.

4. Press the top button so that the second counter hand drops at the 12:00 position (Retrograde: 3:00).

5. Press the top button to move the 1/10th second marker to the 12h00 position (Retrograde: 1/2-minute marker to position 0)

6. Press the crown to move the її to position A.

VIBRANE KERIVNYTSTVO:Time setting | Swatch Touch

Time Settings

1. Push for 1 sec
2. Active mode

5. Seconds
6. Yearbook
7. Symbols
8. Khvilini
9. Stopwatch, alarm clock and timer are shown as more than enough to activate them.
10. Push for 1.5 seconds
11. Hit and let go
12. To confirm, hit for 1.5 sec.
13. Swipe left to change to - / right to change to +

FRIEND OF THE STORY

VIBRANE KERIVNYTSTVO:Setting the date of the day | Swatch Touch

date setting

1. Push for 1 sec
2. Active mode
3. To increase the lightening, stick for 1.5 sec.
After 20 seconds after switching to the remaining activation mode, the display turns on
In order to optimize the choice of the touch interface, wear a yearbook on your hands or, as necessary, hit the battery covers.
4. To switch between functions, scroll through the
5. Date symbol
6. Month
7. Day
8. Rick
9. Push for 1.5 sec
10. Hit and let go
11. To confirm, hit for 1.5 sec.
12. Swipe left to change to - / right to change to +

VIBRANE KERIVNYTSTVO:Additional function of Swatch Touch | Alarm

Alarm

1. Push for 1 sec
2. Active mode
3. To increase the lightening, stick for 1.5 sec.
After 20 seconds after switching to the remaining activation mode, the display turns on
In order to optimize the choice of the touch interface, wear a yearbook on your hands or, as necessary, hit the battery covers.
4. To switch between functions, scroll through the
5. Alarm symbol
6. Godina
7. Alarm ON
8. Khvilini
9. Torknіtsya, schob vimknut alarm signal.
10. Alarm clock WIKL
11. Alarm clock resets at the time T1, Alarm clock will be disabled until reset
12. Push for 1.5 seconds
13. Hit and let go
14. To confirm, hit for 1.5 sec.
15. Swipe left to change to - / right to change to +

VIBRANE KERIVNYTSTVO:Happy New Year's Eve | Swatch Touch

Chronograph Settings

VIBRANE KERIVNYTSTVO:Additional function Alarm | Alarm

TOUCH ALARM

SHOW ALARM HOUR

It's easy to bump into your Swatch yearbook. The arrows move and stretch for about 4 seconds to show the setting of the hour on the alarm clock.

WAKE UP TO ALARM CLOCK

Lightly tap your Swatch yearbook for an alarm ring.

Activate/deactivate the alarm, set the hour of the alarm

Briefly press on the crown and the arrows indicate which streaming mode is to increase or decrease. To change the mode, press on the head again. Set the crown to position 1 and the hands will automatically show the hour, stop setting the alarm. In order to change yoga, wrap the head. (With a proper wrapping of the head, you can put a hvilini, with a swedish wrapping, a year-old). If you press the head again, the arrows turn to the right time, the alarm clock will be activated.

Alarm demo

To listen to the sound of the alarm clock, press on the head and hold for 2 seconds. To sound the sound, once again press on the head

Respect: If the arrows do not clearly show ON / OFF (alarm mode), it is necessary to set the wake-up hour again (for example, after replacing the battery or a strong strushuvannya).

VIBRANE KERIVNYTSTVO:Additional function of Swatch Touch | timer

timer

1. Push for 1 sec
2. Active mode
3. To increase the lightening, stick for 1.5 sec.
After 20 seconds after switching to the remaining activation mode, the display turns on
In order to optimize the choice of the touch interface, wear a yearbook on your hands or, as necessary, hit the battery covers.
4. To switch between functions, scroll through the
5. Torque 1.5 sec
6. Hit and let go

8. Swipe left to change to – / right to change to +
9. Start
10. Stop
11. Max. set hour 99h 59m59s

VIBRANE KERIVNYTSTVO:Additional function of Swatch Touch | Beep

Swatch Touch Beep

VIBRANE KERIVNYTSTVO:Replacement of life | Swatch Touch

Battery Change

1. Battery replacement procedure
2. Replace battery: CR1632, 16.00 x 3.20/3.00V

With the advent of mobile phones, it seems that it happened that many people forgot about the wrist year. It became an invisible fashionable accessory, becoming a “mobile phone”, which was worn on a lanyard or on a garniy motuz. But, through technical progress, which is rapidly developing, mobile phones have become a matter of necessity and many people have guessed about their love year. Tsej aksesuar zavzhdi buv i get rid of fashion. And sometimes it’s possible to bring it up, including the wrist year of the year. Let's take a look, how to nail the wrist year.

Setting up a mechanical yearbook

The mechanism of such a yearbook does not change and donin, for the translation of the hour, the victorious time is counted.

It is necessary to pull a lot of dots on yourself, the docks will not feel a light clatter. Robiti tse required neatly, without special zusil.
Turn the wheel for the year's arrow doti, do not set the exact hour for the docks.
Press on the ring so that it easily rolls the groove. It is also necessary to work carefully, so that the arrows of the anniversary do not bounce.
In order to start the mechanism of the year, you need to quickly and carefully twist the wheel into the sides, with the wheel in the groove. Pretty diligently turn a little too much, otherwise you can stretch the spring. Finish up to eight nepovnyh turns.

Now you know how to fix an hour for a mechanical year.

Setting up an electronic yearbook

Stylish fashionable electronic yearbook may have a lot of additional functions and it is not so easy to fix it. If no instructions have been given to them, then the order may appear unseen. Let's take a look, how to make an electronic yearbook.

A simple electronic yearbook has two buttons. One of them uses the function of displaying the menu on the yearbook screen, and the other is for changing the hour. You need to press the button on the button and blinking numbers appear on the screen, as if they mean the year. For the help of another button, we select the numbers we need. Dalі natiskáєmo I press the button, z'yavlyayutsya fleeting figures - hvilini. Change the required value and press the button again. The hour of lashings.
An electronic yearbook with a large number of buttons can be mother buttons, for the help of which the number, month and day are displayed on the screen, so the stopwatch can be turned on. The date is adjusted in the same way as the hour, and the stopwatch is most often not required to be adjusted.
Uses an electronic yearbook, which may have a low value of additional functions. In order to sign up with them, it is necessary to sort out a little bit, how to fix the date for the year and an hour, and then already deal with other functions. At the anniversary, you can have an alarm clock, a thermometer, a calendar. One of the buttons will be assigned to the same function.

Setting up a quartz year

Let's take a look, how to make a quartz year old. When setting the hour and date in the quartz calendar, it is necessary to follow the following rules:

The front head needs to be retracted.
Set the second hand to 12.
By turning the front head, it is necessary to install a fine arrow.
Dali slid to translate the head in the cob position and turn the right hand until it stops.

Wrist yearbook TREKER

The annual of Chinese virobnitstv, which zdivuvav vakhіvtsіv yakіst packaging, to that it seemed even higher for the small price of the year itself. The kit includes a cord for charging, a disk with instructions and programs, batteries and USB charging. In order to know how to celebrate the Chinese year, it is necessary to read the instructions, otherwise it will be important to learn independently. I create a year-old with a zagal, even if I receive an enemy. The stinks miraculously look at the hands of a grown-up person, that bastard. For the help of SMS commands, the TRACKER is programmed and adjusted.

Now you know about those, as a follow-up to the different years of the year. Tse allow you to easily deal with them and know the exact hour. We wish you good luck.

Battery:

At the first signs of insufficient life (if the time is up), it is necessary to replace the battery in the nearest year's main from a qualified master. The battery that you gave to your birthday has a battery installed by a virobnik plant for test trials, so the term for the service of a battery in a standard one will be shortened.

Zahist vіd vodi:

It is allowed to easily get into the water when the water resistance is 30m (3 atm.). designated for swimming. Vid 10 atm. it is allowed to zanurennya pid water with a vice of troch more than 10 atm.

Looking after the anniversary.

Do not try to open the case and lift the back cover.

Do not give a year of borderline (high or low) temperatures.

Avoid a rough occasion with a year and do not allow them to fall.

Do not zastіbayte remіnets nadto strongly. Between your wrists, that finger is to blame.

To cleanse the anniversary of that remіntsya vikoristovyte dry soft fabric or soft fabric, soaked in a soft neutral water color. miyugogo sobu. Don’t beat for any reason that is easy to steam (such as gasoline, retailers, brewers for cleansing thinly).

If you are not proud of the year, save yoga in a dry place.

Unique consumption of gasoline for a year, retailers, what to clean, aerosols from sprayers, sticky speeches, farby, etc. Chemical reactions, which are called by these materials, produce polishing the body and polishing the repair to a polished finish.

Under the hour of operation, it is allowed to naturally erase the cover of the case and the anniversary bracelet.

Regular wear on skins or plastic belts with sweat or water, as well as repeated contact from dry hot weather can lead to damage or cracking of the belt. In order to secure a three-year term of service, keep a regular eye on him, raising more minds.

Trivale treatment with direct dormouse light can lead to progressive fluorescent contamination (for a year-old with fluorescent parts of the body).

Do not follow the set date of that day of Monday in the period from 8:00 pm to 4:00 am. (Indicate the day of Monday and the number on the scoreboard may not change the next day, or you can bring the mechanism to a screeching halt).

How to set the current hour

Pull the wheel up to another clatter so that the second hand will ring on its own at that moment, if it is straightened out for 12 years.

Turn the arrows forward and set the hour to chotiri, or five times more for the current hour. Then let's see the arrows back and set them back up to the current hour.

Press the wheel back at the moment of signaling the exact hour.

How to set the exact number of the month

Pull the wheel to the first clatter.

Set by turning the ring the exact number of the month.

Push the wheel back.

To turn respect: For some models of the anniversary, the wheel is fastened on the cut and in order to set the hour and date of yoga, it is necessary to twist the kіlkom with wrappers behind the anniversary arrow. Back in the same order, having set the hour, press in a small amount (upping the springs) and twisting the kilkom with wrappers against the year's arrow.

Days of the week

Reveal respect, which is on the dial of the day of tyzhnya vikonan English mine:

Monday - MON

Tuesday - TUE

Wednesday - WED

Thursday - THU

Friday - FRI

Saturday - SAT

Week - SUN

Stopwatch robot in quartz models:

The stopwatch is activated by the upper button. When you press the button again, the stopwatch starts to ring. When pressed on the lower button, the display of the second watch is reset to zero.

If the value of the stopwatch is beaten - the arrow does not turn to position 12, it is set by the upper button when the head is opened.

To set the stopwatch, you need to open the crown to the end and press the top button to release the central arrow from the outside of the ring until it is in position 12. At this position, close the crown. At start-up, and then the serrations of the zeroed stopwatch, the arrow will turn at the exit position.

Instruction

Sip a lot on yourself until a light clatter. Do not report zusil, work everything carefully.

Wrapping around a lot, set the exact hour.

Zazhenіt wheel back at the groove, lightly pressing on the new one. Do not replace the arrows.

For consumption, start the annual mechanism. For this swidko and carefully turn all the same wheel in the side battle, with this pulling of the groove it is not necessary. It is necessary to wind up not until the spring is stretched again, 6 - 8 wrong wraps are sufficient.

The standard electronic yearbook has two buttons as a standard: the menu button and the change button. Press one button - fix the bright number that turns the year. Use the other button to increase / change the value.

If there are more buttons on your birthday, hurry up with the instructions. Ale schvidshe for everything, two of them will be for the weekly menu and change the value, and reshta, for example, for the weekly date, the month of that year (which can also be changed), to start the stopwatch or something else.
I know the same, as I have instructions on hand, you can adjust all available options.

Return respect

Mode - remikkaє in stodomіr - let's go to the alarm clock... ... in the alarm mode Start - add one to the last one, Reset - remikkaє lichilniki between the year - khviliny... Mode - turn back to the year's day...

Korisna porada

The date is adjusted in the same way as the hour, and the stopwatch is most often not required to be adjusted. Uses an electronic yearbook, which may have a low value of additional functions. In order to sign up with them, it is necessary to sort out a little bit, how to fix the date for the year and an hour, and then already deal with other functions.

Jerela:

yak nalashtuvati electronic wrist yearbook

A leather year-old will require eating. In the electronic yearbook, it is necessary to periodically change the batteries, and the mechanical yearbook needs to be started every hour. How is it right to start a mechanical year and set an hour on them? Even the wrong plant of the year can cause breakages up to їх.

Instruction

You can set the hour on the dial of the anniversary by scrolling the arrows, like forward, so back. Zrozumіlo, it is better to wrap the arrows at the bіk, de lessen the number of wraps. And the axis of the anniversary with the calendar is that reshtoy collapsible functionsє blame. The constructions of such anniversaries are different, it is better to consult for a singing model of an anniversary with a representative of their foreman. If you hesitate - move the arrows only forward. І calendar in order with other folding functions of the yearbook, it is better to install it only after the set hour.

The annual plant is built in two ways: wrapping the head here and there, or only forward. Another way to beat faster is because the cam clutch and the winding pinion are less worn. If you want, we'll call the plant head back for an hour. It is necessary to re-apply the oiling mechanism.

Installing the annual calendar manually, do not break sudden changes, so as not to damage the mechanism. Qi mechanisms are also lower and on high swidkost are not protected.

A year with a car factory should only be started at different times. Most of these automatic years will not require a regular scheduling rank “reinforcement”. If the spring of the “automatic machine” is fully wound up, then if you try to start the yearbook manually, you can mess up the mechanism, wind it up regardless of those that are fixed on a special plate, the flywheel plays the role of a galvanic pad and protects the mechanism from breakdowns.

Prote, in a manual winding, you still need to wind an automatic yearbook. On the right, in that the periodic plant of the year-old helps to re-spread the oil in the clockwork mechanism and the humic thickened head.

If you pull the head, do not apply force. As if to feel the support from the side, twist the head under the hour її vytyaguvannya lower and smoothly. So you can turn the cam clutch at once from the intermediate wheel of the arrow translation. It is necessary to turn the head in the same place smoothly. If you don’t go, turn around її under the hour of the onslaught.

Return respect

You know how to start a yearbook correctly by reading this article. Bigness mechanical yearbook to make a power reserve of less than two deb, it is necessary to start a year of the day. Bazhano choose one and the same hour for the plant of the mechanism, then the additional cost will be the same hour. Wind up the year-old on your wrist, rather than take yoga out of your hand, then the vise on the crown will be turned off.

Korisna porada

Virobniki firms use terms in a different way, prote, in the middle, prevention of mechanical years is necessary to carry out skin three to five years. 3. What robots are involved in the maintenance and repair of a mechanical year? It is recommended to start a yearbook to navіt every time you do not wear it for the next hour. Tse zabіzhit zagusannya mastil parts mehanіzmu. Well, if a year old can have an automatic winding system, and if you actively wear it every day for 10-12 years, then it is not necessary to wind up a year old.

Jerela:

mechanical year plant

The accuracy of the course for competently adjusted mechanical years can be higher, lower for inexpensive quartz ones. In order to create this operation wrist year, next turn to the master. A axis clock chi annual with a pendulum you can fix it yourself.

Instruction

At the alarm clock, a special important element on the back wall serves as an element for regulating the frequency of the ringing. Put yoga on the back at the middle position. Set an hour after you select the reference ring. Check one doba, after which you turn it over, the indications of the year of the year differ by the number of indications of the reference dzherel, and in a certain book. Like an alarm clock, pass the troch important at the bik, meanings like “ZAMED”, like hurry up - at the bik, meanings like “USKOR”. stand up. Through the kіlka dіb you can reach the alarm clock even the exact move. Obviously, periodically, you all the same happen to correct the yoga display, even if it’s richer, lower, earlier.

Setting up an alarm clock for the help of a special tool for re-checking the yearbook of the PPC series is an oncoming rank. Insert a new paper disk into the device, send the work annual to the microphone and start the recording mechanism. After the completion of the reverification on the disk, a straight radial line can appear. As if it was twisted at the bik, which shows the improvement of the robot of the year, the trochs to speed up the run, as if it killed, which shows the speeding up of the robot - to improve. Replace the disk in the device and repeat the recheck. To work like this, the docks on the disks do not come out straight line anymore.

At the pendulum year, for adjusting the frequency of coliving, there is a nut on the end of the pendulum. To improve the course, turn the nut lightly, so that the pendulum drops, for speeding up - turn it lightly, so that the winch rises. The very method of regulation is the same as for the alarm clock. annual, krіm adjusting the frequency of coliving, vimahayut regulation of verticality. The very same stench is attached to the wall for the help of one flower and a screw, and not two. The criterion for the correctly reversed position of the year is the equal head: the trivality of any unpaired pauses between clapping is to blame for the trivality of any guys. If you can’t adjust this year’s parameter by ear, you can speed it up with a microphone and an oscilloscope, which will allow you to have a proper boom mode and a great sound.

Return respect

Yakіsno krіplyuyte be-what a real year.

There is a high voltage on the writing electrode of the PFC device at the moment of propelling the disk.